AutoLifts

LEARNING CENTER

Practical Information for Owners and Prospective Owners of the
Single Column UTV & Mower Storage / Service Lift

Learning Center Document	AL-LC-104
Title	Receiving and Assembly
Category	Installation
Revision	1.0
Originally Published	August 2026
Last Revised	August 2026

Receiving Your Lift

When your lift arrives, inspect the shipment before beginning assembly. Look for visible shipping damage and verify that the major components have been received. If damage is discovered, document it before proceeding.

Organize the Components

Move the shipment to the installation area and organize the components. Keeping the hardware together and laying out the larger parts before assembly will make the installation process easier.

Column assembly
Platforms and ramps
Bolster beam
Power unit
Hardware and small parts
Safety components

Before You Begin Assembly

Installation Checklist

☐ Concrete requirements have been verified.
☐ Electrical service is available.
☐ Adequate overhead and side clearance has been confirmed.
☐ All parts have been inspected for shipping damage.
☐ Required tools and lifting equipment are available.

Assembly Overview

Follow the installation manual step by step during assembly. Assemble the lift in the recommended sequence, verify component alignment as work progresses, and do not permanently anchor the column until the installation location has been confirmed.

Taking a few extra minutes to organize the work area before assembly usually results in a smoother installation.

Let's Talk

If you have questions before beginning assembly, we'd be happy to help.

800-667-0889

Notice

This Learning Center Document provides general guidance only. Always follow the current installation manual supplied with the lift. Procedures and specifications may change without notice.

Revision History

Revision	Date	Description
1.0	August 2026	Initial publication.